PRODUCTS商品櫥窗
LINKS快速連結

商品明細

PET Automatic Blow Molding Machine

  • 料號：EM Series
  • ● Distance between valves module and neck sealing is short.
    ● Air wastage reduction above 15% over other similar category.
    ● Recycle rate as high as 45%, compare with other competitor.
    ● Low energy heating

商品詳細介紹Product Introduction

Features
Integrating with many advanced functions in one, KEENPRO EM Series fully automatic PET stretch-blow molding machine exhibits extraordinary performance throughout.


Heating System Outstanding
1. Single-lamp bilateral centralized heating
2. Temperature of all channel inside heating box controlled within 3°C
3. Low energy heating




Transfer System Outstanding
1. Using "screw drive" for fast continuous moven
2. Stable transfer system with U-shaped track and 1/3 sliding driving force, less resistance.
3. Composite of glass fiber and Nylon carrier block with loading force up to 945 kgf

EM Series + 

1. Distance between valves module and neck sealing is short.
2. Air wastage reduction above 15% over other similar category.
3. Recycle rate as high as 45%, compare with other competitor.

                               
  
                      Key Point

EM Series + 

1. Every 1,000pcs bottle energy waste 2.0kW/h
2. Reduce 130,000kg Carbon emission per year.
3. Energy saving as high as 47%, compare with other competitor.

      Power Consumption Analysis





A Preform Infeed System
● The conveyor delivers preforms from hopper to unscrambler, then preforms are automatically arranged in order for feeding at a single way.
● Movement and locating of preform dividing block is driven by servo motor.
● Preform in-feed gripper picks preforms and place them on the transfer system.

B Transfer System
● Screw driven controlled by servo motor providing fast and smooth motion; meet sanitation and environmental protection. As distinguished from the conventional linear transfer system is normal transmitted through a chain or air cylinder, the noise is loud.

C Heating System
● The preforms are fed into the heating system in a parallel horizontal matrix mode.
● Double side single accommodation heating zone and reflect heat concentration concept make preform more evenly heat.
● Module design enhance maintenance of IR lamp and cooling ramp.
● Preform out from heating system, through thermocouple device to control preform temperature and adjust heating power efficiently.

D Molding System
● The clamping mechanism is driven by a combination of servo motor and cam.
● The transfer system delivers the heated preforms to the mold for blowing bottle process.
● The high-pressure air exhausted after blowing is recovered to air storage tank, which can be reused as air booster in low-pressure situation.

E Preform Infeed System
● The bottle discharge position is equipped with a connecting device that connects to air conveyor, which permits the formed bottles to be directly fed to the filling system.








For more information, please visit the following website:
https://www.keen-pro.com/en/index.html
 

商品注意事項Product Notes

 
 
TOP

興祐實業有限公司

Copyright © 興祐實業有限公司 All Rights Reserved.